View Single Post
Old 12-03-2014, 03:30 PM   #103
Senior Member
FrankWest's Avatar
Join Date: Sep 2013
Posts: 2,574
Default Re: 1933 can't start after recent restart

Originally Posted by Pat/Ohio View Post

Look at the picture that DavidG posted above, now read his post. He has clearly pointed out what you should do next. Remove the timing gear inspection cover (2 bolts shown in the picture and one under the cover that goes through the oil pan). After removing the 3 bolts and timing gear inspections cover, you can now crank the engine over a few spins and check the teeth on the timing gear. Very straight-forward procedure. Good luck!
will do!
sounds like the best plan.
FrankWest is offline   Reply With Quote