View Single Post
Old 07-01-2020, 04:28 AM   #1
wkuehnis's Avatar
Join Date: Dec 2016
Location: Switzerland
Posts: 55
Default Signal for a electronic speedometer

I am building a A Speedster.
I use all Gauges with the same design .
Now I need the signal for the electronic speedometer.
Does anymode have a solution?
I think, the only way is the position at the torqueTube, where the original cable driven speedometer is connected.
Here I can get the signal from a rotating cable or Pin and transfee it to a electronic signal.
Does anybody has a drawing of such a solution?

Thanks for help
wkuehnis is offline   Reply With Quote