The Ford Barn - View Single Post

Tom Wesenberg · 05-13-2010, 11:20 AM

Did you use a BOTTOMING TAP? This is what you need to get the threads down to the bottom on a closed hole. And, be sure to blow the hole clean.

05-13-2010, 11:20 AM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Broken stud Did you use a BOTTOMING TAP? This is what you need to get the threads down to the bottom on a closed hole. And, be sure to blow the hole clean.