Quote:
Originally Posted by 19Fordy
Jason: This has been discussed at length. The BOB DRAKE unit https://bobdrake.com/products/1936-5...5a40d8e3&_ss=r operates on the Ohms principle, which is NOT the same as the original OEM King-Sealy unit Ford used. Drakes unit will never work with the full range of accuracy desired because it does not operate on the same principle of " metallic points heat resistance" as the KS unit.
Could you post a photo of your original unit? If it is a good working unit you can adapt it to your new tank instead of the DRAKE "pretender".
Here's a search that may help.
https://www.fordbarn.com/forum/searc...rchid=20999882 and look through these posts.
|
I wouldn't say never. I installed an aftermarket sender(yogi's rod parts) in my '41 ford with stock gauge and it worked great. E was empty and F was full