Quote:
Originally Posted by 1crosscut
To balance tires Dyna Beads worked well for me. Getting the beads in can be challenging though.
I found that using a jack under the axle start with the tire lowered so it is pretty squished against the ground. Attach the tube to the valve stem and start flowing the beads in. When they slow going in bump the jack up a bit creating negative pressure and the beads will start flowing again. Repeat as needed until all the beads are in.
|
That is probably the best way I have heard of yet fot installing beads. I am going to try that next time, if I remember. Not something you have to do very often.