[machineman64]

Originally Posted by Kohnke Rebabbitting

If the clearance between the Ring and Pinion is right, not under .006, and not over .010, depending on the gears, and used gears don't Bottom out, with out any, tuff turn spots?


It sounds like you used, a used set of Ring, and Pinion gears. If that is the case, weather they were a matched set or not, there is NO way you can set the mesh on used gears that they won't Wine, or Howell. It's just a matter of fact.


With that said, they still will work fine, but get used to the wine!


Herm.

about 4 or 5 years ago I rebuilt the rear end in my 30 coup with miss matched gears and it runs as quiet as my Cadillac, no noise what so ever.
John