View Single Post
Old 04-03-2015, 06:00 PM   #6
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,379
Default Re: 1933 engine splash pans

Sponsored Links (Register now to hide all advertisements)

These photos are off a Right Hand drive 1934 Ford V8. I have shown them from the top as well as the underside. While they fit on the underside of the Chassis Rails, I can't talk for LHD models, but on the RHD models, the Right Hand one fits under the Bottom Fold, while the Left Hand one fits under the Top Fold. The Left Hand one was very difficult to fit as it covers the Exhaust Pipe with very little room for hands to fit under. My examples don't have Caged nuts, which could explain why I had problems. I don't know how they compare in shape to the LHD examples? These are very hard items to locate, as over the years, when Mechanics had to remove an Engine, quite often these Splash Pans were never replaced but simply discarded.
mercman from oz is offline   Reply With Quote