The Ford Barn - View Single Post

flatheadmurre · 03-22-2016, 10:32 AM

Should be a 7/16-20 so a bolt for a banjofitting at your local hydraulic store would do the trick then drill and solder a pipe into the head of the bolt.
Or as JSeery wrote shouldnt be to hard to find a used one.

03-22-2016, 10:32 AM	#220
flatheadmurre Senior Member Join Date: Apr 2015 Location: Sweden Posts: 3,045	Re: 59 AB engine rebuild Should be a 7/16-20 so a bolt for a banjofitting at your local hydraulic store would do the trick then drill and solder a pipe into the head of the bolt. Or as JSeery wrote shouldnt be to hard to find a used one.