Sponsored Links (Register now to hide all advertisements)
Ed,
Yes, I have a 29 CCPU, but it is setting under a tarp waiting until I finish my 28 special coupe, which is getting close to done and my 29 phaeton I just started on. I hope to get to it in a year or year and a half. The floorpan under the seat riser, I am almost positive, is riveted in place with 3/16" brazierhead rivets using a waffle tool to set them. The best way to do it is to drill all the rivet holes in the pan, if it is a new pan, and use 10-24 or 10-32 round or pan head machine screws to hold the pan in position, then remove one screw at a time and insert the rivet and set it. Of course the head should be on the top side. Hope this helps.