The Ford Barn - View Single Post

Russ/40 · 01-07-2020, 06:54 PM

Yes the colors are correct as you stated. As to the slinger, I need a better perspective as the slinger goes inside the transmission case. I dont understand why you have to remove anything unless you put it on wrong.
Does the front bearing retainer seat properly? Something is amiss. Shouldn't make a difference having a sealed bearing.

01-07-2020, 06:54 PM	#25
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: Revising gear box Yes the colors are correct as you stated. As to the slinger, I need a better perspective as the slinger goes inside the transmission case. I dont understand why you have to remove anything unless you put it on wrong. Does the front bearing retainer seat properly? Something is amiss. Shouldn't make a difference having a sealed bearing. Last edited by Russ/40; 01-07-2020 at 07:21 PM.