Quote:
Originally Posted by old31
What do you guys use for a tach, and how do you hook them up
|
I use a "Tiny-Tach".
It is a small digital tach that will mount almost anywhere.
All it needs for a hook up is one wire that is grounded and a second wire that wraps around the coil wire.
I like to run the engine between 1750 and 2000 RPM while on the road. I limit the engine to no more than 2300 RPM for short periods of time when pulling a steep hill in the lower gears etc.
I find a tach very helpful and it is fun to watch the speed of the engine.
My opinion,
Chris W.