Re: 12 Volt Conversion
The coil that was recommended for my 12 volt conversion was the part #40611 epoxy 3.0 ohm which is a 40.000 volt Flamethrower coil . Use whatever coil that you want but I wouldn't recommend the oil filled version . If the oil filled version is rated at 3.0 OHM it will work but will need to be mounted upside down with the connections at the top to prevent oil leakage out the tower The epoxy version is a solid type coil similiar to the original tar filled coil that came on the model A and can be mounted in the usual model A manner . The Ohms don't look right on the coil pictured and I wouldn't risk it
|