Quote:
Originally Posted by uncle buck
NAPA part # 36502 should work for you. It's 20.875 overall with the 7/16" - 20 on the wheel cylinder end and 7/16" -24 (1/4" female inverted flare) on the frame end. the next shorter is # 36564 at 18.688" long and both use a # 80742 hose lock clip. Part #25664 is 20" long #4000 is 19.25" long but both use a 5/8"-18 nut to attach to the frame bracket.
The 25629 is 21.1" long if this all helps
|
Napa had some #36502 so i bought 2 of them. When i screw this into the wheel cylinder it goes in all the way until the metal hits the casting of the wheel cylinder. Do i need to just add a crush washer to this?