The Ford Barn - View Single Post

40cpe · 11-17-2019, 06:24 PM

The governor sends a ground to the relay when the car reaches the preset speeds, so there would be no voltage present on that terminal. You would need to check for voltage on the "SOL" terminal when the car reaches about 30 to see if the relay system is operating.

11-17-2019, 06:24 PM	#4
40cpe Senior Member Join Date: May 2010 Location: Star, MS Posts: 4,024	Re: T 86 oevrdrve issue The governor sends a ground to the relay when the car reaches the preset speeds, so there would be no voltage present on that terminal. You would need to check for voltage on the "SOL" terminal when the car reaches about 30 to see if the relay system is operating.