Quote:
Originally Posted by Tod
I'd like to get my hands on a junk 21 stud block. My idea is to make a 21 stud block with most of the same model and make changes as needed. I can't go into all the details of how I will do all of this because most of it is specialized to tooling guys and maybe a vey good foundry man. I have basically designed this while trying to sleep since I decided to do it. If the same basic deck height, crank/cam locations, valve locations and exhaust ports are close, or the same, I can do both blocks very easily. If the rear will suffice as an 8BA style that would be better.
Tod
|
Tod..........Some basic (yet critical) dimensions you need to be aware of. Click the thread below.
Bored & Stroked has lengthy details in POST #32, as a place to start. DD
https://www.fordbarn.com/forum/showt...lve+centerline