Thread: 1937 No start
View Single Post
Old 10-10-2011, 05:13 PM   #208
George/Maine
Senior Member
 
George/Maine's Avatar
 
Join Date: May 2010
Location: Mid coast Maine
Posts: 1,878
Default Re: 1937 No start

From front to back Pass Side 1234,
Drivers Side 5678.
You realy can,t be out of time with dist in place.
There is no need to find TDC.But the caps were wired with the notch down that would be drivers side.If wired that way it on wrong side.Number 1 is pass side if I was put on right with notch up 1234 . I think the tubes can only go one way.
So my Guess the caps are mixed.And to add to this it maybe still not working.
George/Maine is offline   Reply With Quote