The Ford Barn - View Single Post

Tinbasher · 03-04-2019, 09:44 PM

Looks like a couple of things going on. You'll have to draw the top of the rad back towards the cowl. So shorten the nuts on the support rods. That will pull the hood back and get rid of the overlap at the bottom corners to the rad shroud. Then You'll have to shim the cowl up to straighten up the vertical line. Then you can work your way back to the door fit and the 1/4's. The frame is Straight? JP

03-04-2019, 09:44 PM	#2
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: 29 Tudor hood alignment Looks like a couple of things going on. You'll have to draw the top of the rad back towards the cowl. So shorten the nuts on the support rods. That will pull the hood back and get rid of the overlap at the bottom corners to the rad shroud. Then You'll have to shim the cowl up to straighten up the vertical line. Then you can work your way back to the door fit and the 1/4's. The frame is Straight? JP