Quote:
Originally Posted by Kevin in NJ
Maybe we can talk Brent to take a bit of time showing the use of the new sanding fibers and the roll on paint?
|
Now, so that we are clear, we are not speaking of roll on paint, -but roll on
primer. There are several type of this primer which have been out for awhile such as PPG's SX1060 and others, but the technology is ever-evolving and they are now coming out with higher solids primers. Go look at this tech sheet to see the specifics.
https://www.tat-co.com/TranstarAutob...1.pdf?ext=.pdf
When they have the high-build primer/surfacers out, we will look at transitioning to those too.
As far as the sand paper, go to Mirka's website and read about it;
https://www.mirka.com/en-US/us/produ.../#/AE0/AUTONET
or their
https://www.mirka.com/en-US/us/produ.../#/540/ABRANET
The benefit for us using this is we have a vacuum system in the body shop because our body shop is air conditioned.
.