The Ford Barn - View Single Post

Aviatur · 05-31-2019, 12:26 PM

FLatheadmurre, good ideas, but I took the carb off and removed the nozzle clusters. Using a very small dental pick I was able to run through all of the ports and then follow up with spray carb cleaner. Checked to see that I had all 4 gaskets in place when putting it back together. Timing is spot on. The missing (if it gets bad enough) will pop through the exhaust which makes me think it was rich, but now I don't know.

05-31-2019, 12:26 PM	#11
Aviatur Junior Member Join Date: May 2019 Location: Iowa Posts: 16	Re: Stock 1950 8BA FLatheadmurre, good ideas, but I took the carb off and removed the nozzle clusters. Using a very small dental pick I was able to run through all of the ports and then follow up with spray carb cleaner. Checked to see that I had all 4 gaskets in place when putting it back together. Timing is spot on. The missing (if it gets bad enough) will pop through the exhaust which makes me think it was rich, but now I don't know.