Thread: Hi Temp damage
View Single Post
Old 05-29-2020, 03:37 PM   #7
old splicer
Junior Member
 
old splicer's Avatar
 
Join Date: May 2010
Location: nor-cal
Posts: 27
Default Re: Hi Temp damage

It got hot enough to put the piston skirts in in the pans and turn a set of edelbrock flats into a puddle. All of it sat under a 3 ft layer of ash for a couple
off weeks. I also had an old braze repair disappear out of combustion chamber as well as some brass plugs.
old splicer is offline   Reply With Quote