The Ford Barn - View Single Post

Tinbasher · 02-19-2019, 09:32 PM

The lower deck lid panel is bolted to the 1/4 panels with 1/4 flat head bolts and the lower edge bolts to the rear body crossmember with pan head 10/32 screws if I remember rightly. The new panels can be a little higher than the originals and the shape side to side can be to flat. So take some time and measure up the new panel. You may have to rework it before you put it in or you will loose the gap for the decl lid. JP

02-19-2019, 09:32 PM	#2
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: Roadster and coupe rear panel install. The lower deck lid panel is bolted to the 1/4 panels with 1/4 flat head bolts and the lower edge bolts to the rear body crossmember with pan head 10/32 screws if I remember rightly. The new panels can be a little higher than the originals and the shape side to side can be to flat. So take some time and measure up the new panel. You may have to rework it before you put it in or you will loose the gap for the decl lid. JP