Re: Types of trunks for model a’s
Here are some photos and some dimensions. More to come. I am not sure what is Ford and what is Kari-Keen.
There is a rectangular piece of steel, 1/8 inch thick, that is 6 inches wide and 7 1/4 inches high that looks like it attaches to where the spare tire would normally go. It has the top corners cut off. It bolts to another 1/8 inch thick of steel that is 6 inches tall in the center and tapers off on both sides to about 4 inches high at the ends. It is 26 inches wide. It mounts to a tube that runs from one side of the fender mount to the other. The tube is 1 1/2 inch OD. The plate mounts to the tube with U bolts.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|