The Ford Barn - View Single Post

JWL · 09-02-2020, 12:49 PM

I do not recall seeing a 59A with freeze plugs. If I ever found one I would use a sealant when installing them.

There is minimal side thrust on the pump pushrod and .020 clearance is not a worry.

There is basically no limit to material removal for stem clearance setting.

09-02-2020, 12:49 PM	#8
JWL Member Emeritus Join Date: May 2010 Location: Fitzgerald, Georgia Posts: 2,204	Re: A couple of 59a Engine Queries rebuild. I do not recall seeing a 59A with freeze plugs. If I ever found one I would use a sealant when installing them. There is minimal side thrust on the pump pushrod and .020 clearance is not a worry. There is basically no limit to material removal for stem clearance setting.