The Ford Barn - View Single Post

BillCNC · 03-29-2018, 01:07 PM

Well,

Pulled the windshield, replaced all the rubber including the header seal which was not installed in the first place.

All went smoothly and took her for a test drive. The Windshield rattled a little when opened but that was quickly remedied with a small O-Ring .0625"x.250"x.375 on each of the inside of the swing arm mounts. My car now only has one noise to fix, ... The rear view mirror needs a shim to shut her up.

BTW - I lubed the windshield hinge with WD-40, ... And is very easy to move, ... almost to easy.

03-29-2018, 01:07 PM	#8
BillCNC Senior Member Join Date: Aug 2017 Location: SoCal Desert Posts: 826	Re: Windshield Hinge Lube Well, Pulled the windshield, replaced all the rubber including the header seal which was not installed in the first place. All went smoothly and took her for a test drive. The Windshield rattled a little when opened but that was quickly remedied with a small O-Ring .0625"x.250"x.375 on each of the inside of the swing arm mounts. My car now only has one noise to fix, ... The rear view mirror needs a shim to shut her up. BTW - I lubed the windshield hinge with WD-40, ... And is very easy to move, ... almost to easy.