View Single Post
Old 12-13-2019, 09:15 AM   #3
Senior Member
GB SISSON's Avatar
Join Date: Jan 2014
Location: Orcas Island Washington
Posts: 2,193
Default Re: Sheared starter drive bolt

Originally Posted by jw hash View Post
the Model A starter drive used 5/16" bolts and they break all the time. the V8 starter drive uses 3/8" bolts, I run the V8 drives and have not broke a bolt in many years. check and see what bolts you have. if you are running a 6 volt starter on 12 Volts it is going to engage hard and that is hard on the drives and or the bolts.
So, a V8 drive will slide onto the A starter shaft? No redrill or tap?
'47 1/2 ton pickup next project, '47 one ton panel 99% stock nearing completion, '47 2 ton with 8ba and 9' script stakebed, '46 1/2 ton woodie project,'59 F350 9' flareside pickup with cummins 6at. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)
GB SISSON is offline   Reply With Quote