View Single Post
Old 11-15-2019, 09:47 AM   #5
nick c
Senior Member
 
Join Date: Aug 2010
Posts: 230
Default Re: Snyder’s Inserted Rod Size?

Just went to Snyders, it say's the A-6202 bearing can be fitted to the original con rod, boring it out to 1.624/1.625, and remove all babbitt from thrust face, braze up and finish to a width of 1.580 less .003/.005. My question is why braze to 1.580 when the original width of rod is 1.625?
thanks
nick c is offline   Reply With Quote