Quote:
Originally Posted by GPierce
I got under bed and measured the width of the boards on my narrow bed 31.
The two outboard boards measure 7-1/8 The three others measure 6-7/8.
The sub rails are 1-3/4 tall x 3-5/8 wide. Unknown wood species. They are about 40 long. I cant get an exact length as it is blocked by the dust pan between the cab and the bed.
The sub rails run from the front of the bed and end 15 short of the steel bed angle that they support.
|
Thank you for doing that! Interesting, mine are pretty close to the ones in the older thread drawing. But your narrower ones are over an inch wider!
Subrails measurements appear to be spot on.