Thread: Block cleaning
View Single Post
Old 04-14-2017, 10:30 PM   #11
denniskliesen
Senior Member
 
denniskliesen's Avatar
 
Join Date: Nov 2016
Location: SoCal
Posts: 877
Default Re: Block cleaning

Vinegar takes a lot of time to do it's thing. I ran it straight for a few days and I know it wasn't long enough to do much good, so patience is your best virtue. I did quite a few flushes after dropping it pulled the lower connection off to give it a fast dump and refilled with 50/50 coolant. I know glycol can make it run 20 degrees hotter but the 3 row tube and 10 fpi recore has proven itself to be adequate. I also have a 160 thermostat as close as possible to the upper neck.
denniskliesen is offline   Reply With Quote