The Ford Barn - View Single Post

Timstruck · 01-13-2019, 03:03 PM

I appreciate all the responses and especially the pics!

There are too many variables for me to figure this out at the moment. My setup has the water pumps on the front of the heads and none of the pics above show that. I don't know if the pulley's will line up. I would like to go with the PowerGen or Whitney 12V setups but I am trying to use a dual carb setup as well. The short version of the PowerGen has a note that says not to use a fan mounted on the front (not sure why the short one has the note and not the longer ones...).

Also I notice that some of the PowerGen's have a fixed mount and others have a clamp. I suppose the clamp gives flexibility for fore and aft adjustment, but doesn't seem as strong a setup for mounting a fan on the front.

Confusing...

01-13-2019, 03:03 PM	#13
Timstruck Member Join Date: Sep 2017 Location: North Carolina Posts: 73	Re: Fan Install I appreciate all the responses and especially the pics! There are too many variables for me to figure this out at the moment. My setup has the water pumps on the front of the heads and none of the pics above show that. I don't know if the pulley's will line up. I would like to go with the PowerGen or Whitney 12V setups but I am trying to use a dual carb setup as well. The short version of the PowerGen has a note that says not to use a fan mounted on the front (not sure why the short one has the note and not the longer ones...). Also I notice that some of the PowerGen's have a fixed mount and others have a clamp. I suppose the clamp gives flexibility for fore and aft adjustment, but doesn't seem as strong a setup for mounting a fan on the front. Confusing...