The Ford Barn - View Single Post - Is There Any Epoxy That Will Stick To Brass???

Tim Ayers · 08-26-2019, 10:05 AM

I've just used a two part epoxy product called 1212 made by Belzona. It's not cheap, $150 for 450g, but used it to repair a rot hole in a water jacket on a machined block.

So far so good. The reason we chose it was it able to be used on surfaces that are contaminated.

08-26-2019, 10:05 AM	#9
Tim Ayers Senior Member Join Date: May 2010 Location: NJ Posts: 6,181	Re: Is There Any Epoxy That Will Stick To Brass??? I've just used a two part epoxy product called 1212 made by Belzona. It's not cheap, $150 for 450g, but used it to repair a rot hole in a water jacket on a machined block. So far so good. The reason we chose it was it able to be used on surfaces that are contaminated.