Quote:
Originally Posted by Ian1932
Why is this a 32'? I have a 5w coupe that im doing next that is going to be 100% bone stock 32' except maybe the engine block...Im trying to reponsibly select parts for this car and set aside "stuff" for the 5w...
|
A few details about '32 trans...............the shift top has bosses for the emergency brake handle, the trans case does not have a removable clutch inspection tin cover(where the grease cup is), it has a '32 rear mount (flat plate) and the stoplight switch is mounted to the shift top. A '34 trans will look similar except has a clutch inspection cover and can be set apart from other case by the lack of grease fitting on the clutch shaft bosses (as is the same with your '32 case). Good luck