Quote:
Originally Posted by Tim Ayers
Hey Dale:
I guess we'll see. I trust Ronnie's opinion fully on where the bores need to go. Still need to get the final word from mag testing.
So, let's say 3 3/8" +.010-.030 over, Potvin 3/8ths or Isky 1007B cam, aluminum flywheel, larger valves, and Ron's magic will make this motor a real hot rod mill.
Sitting on pins and needles waiting to hear.
|
How much stroke are you going to run, how many carbs, what application? In a bigger cube motor, you might even go to a Potvin 425 - depends on what you want to do with it.