View Single Post
Old 11-19-2017, 02:40 PM   #9
ford38v8
Senior Member
 
ford38v8's Avatar
 
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,646
Default Re: 48 coupe- car stance is not even all around

Alex, From the first picture, it is obvious that your shackles are not at equal angles, the driver side allowing the driver side axle to hang lower than the right. New shackles are available, the Nylon ones from Speedway are easy to install. This is only part of the problem, however: Hard to tell for sure from the picture, but it appears that the U Bolts are not cinched up tightly, the passenger side appears to have slack in it, which also may be from installation of wedges as pictured in another post. Looking at the center bolt, it may be off center from either wedges, or from not being centered in the frame hole.
__________________
Alan
ford38v8 is offline   Reply With Quote