The Ford Barn - View Single Post

Special Coupe Frank · 05-11-2011, 04:18 PM

From a reply to the valve-stem question on the AACA Forum:

"Per the judging guidelines [ AACA ]... Valve stems must be metal prior to 1930 and must be the same as originally supplied on the vehicle. Documentation may be required. Fords will have metal valve stems through 1934."

Incidentally, this reply was from a Model A guy who hangs-out on the AACA forum...

05-11-2011, 04:18 PM	#10
Special Coupe Frank Senior Member Join Date: May 2010 Location: Northeast Penna Posts: 2,108	Re: Why did they use metal valve stems? From a reply to the valve-stem question on the AACA Forum: "Per the judging guidelines [ AACA ]... Valve stems must be metal prior to 1930 and must be the same as originally supplied on the vehicle. Documentation may be required. Fords will have metal valve stems through 1934." Incidentally, this reply was from a Model A guy who hangs-out on the AACA forum...