The Ford Barn - View Single Post

Synchro909 · 08-01-2018, 10:32 PM

I'd only use the ones that are shrunk on.
Even if they are not spot on when fitted, a lot can be done with a drill and a welder when balancing.

08-01-2018, 10:32 PM	#8
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: counter weights on the crankshaft I'd only use the ones that are shrunk on. Even if they are not spot on when fitted, a lot can be done with a drill and a welder when balancing. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.