The Ford Barn - View Single Post - Spark plug wire terminal

Bill OH · 01-20-2021, 10:20 AM

I strip off 1/2” of insulation, insert the bare wire thru to hole in the terminal, fold the wire over and insert into the distributor cap. Bare wire tightens the connection.

01-20-2021, 10:20 AM	#9
Bill OH Senior Member Join Date: May 2010 Posts: 425	Re: Spark plug wire terminal - Crimp, Solder, or neither? I strip off 1/2” of insulation, insert the bare wire thru to hole in the terminal, fold the wire over and insert into the distributor cap. Bare wire tightens the connection.