The Ford Barn - View Single Post

Road Trip · 11-09-2020, 05:12 PM

Steve - Thanks for the info thus far. I do have those holes in the frame; there is another one almost 9" back from that one, which lands under the bed. It seems there should be another one between them, under the back of the cab for support / mounting; again, the block pictured suggests that. All my sheet metal is new and not drilled, adding to the mystery. the seat riser brackets only have two 1/4" holes on the bottom, and at that, it would make the cab "drop" if it was directly on wood.

I'll post some pic's later tonight to better show what I'm dealing with.

11-09-2020, 05:12 PM	#9
Road Trip Senior Member Join Date: Jun 2020 Location: North Carolina Posts: 153	Re: '29 CC PU assembly confusion Steve - Thanks for the info thus far. I do have those holes in the frame; there is another one almost 9" back from that one, which lands under the bed. It seems there should be another one between them, under the back of the cab for support / mounting; again, the block pictured suggests that. All my sheet metal is new and not drilled, adding to the mystery. the seat riser brackets only have two 1/4" holes on the bottom, and at that, it would make the cab "drop" if it was directly on wood. I'll post some pic's later tonight to better show what I'm dealing with.