Removing speedometer drive gear
I have a speedometer drive unit that has a worn gear on it and needs to be replaced. The shaft/gear turns OK, but the gear is stuck to the shaft. Does anyone know how to remove the shaft/gear? I hate to try to remove the end plug in order to press the shaft out, as the plug would probably be damaged beyond repair and I don't think plugs are available from parts suppliers. Heat usually works on freeing up stuff, but with the aluminum housing, I am concerned heat might damage the housing. The shaft appears to be OK, so it would be great to save it if possible. BTW, I soaked the drive unit in rust remover for a couple weeks and it didn't help.
Rusty Nelson
|