The Ford Barn - View Single Post

David R. · 05-17-2020, 06:24 AM

I found some shims from Rock Auto when I did my AA king pins. They are larger than A king pins on the ‘30. I used original thrust bearings but still needed .010” to 020” shim. Got a pack of 20 that were .005”.

05-17-2020, 06:24 AM	#8
David R. Senior Member Join Date: Aug 2016 Location: West Virginia Posts: 430	Re: King pin spacers I found some shims from Rock Auto when I did my AA king pins. They are larger than A king pins on the ‘30. I used original thrust bearings but still needed .010” to 020” shim. Got a pack of 20 that were .005”.