The Ford Barn - View Single Post

mercman from oz · 12-25-2017, 05:20 PM

Regarding Pan removal while engine is fitted in car, I unbolted the Radius Rods at the rear of my 34 Ford and put a spacer in there to bring them down lower at the rear. I didn't undo the front engine mounts. Hope that this helps.

12-25-2017, 05:20 PM	#11
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,376	Re: Removing oil pan in place....RHD Regarding Pan removal while engine is fitted in car, I unbolted the Radius Rods at the rear of my 34 Ford and put a spacer in there to bring them down lower at the rear. I didn't undo the front engine mounts. Hope that this helps.