View Single Post
Old 12-25-2017, 05:17 PM   #10
mercman from oz
Senior Member
 
mercman from oz's Avatar
 
Join Date: May 2012
Location: Queensland, Australia
Posts: 10,376
Default Re: Removing oil pan in place....RHD


Here is a picture of the underside of my 34 V8 engine. Notice the 4 Holes that are hidden when the Sump is on. When you remove the Sump (Pan), make sure that you remove these 4 Plugs, and poke wire or similar up the holes to disturb all the buildup of sludge, scale etc. You will be surprised at how much rubbish gets trapped in there. Hope that this picture helps. Mercman <><
mercman from oz is offline   Reply With Quote