The Ford Barn - View Single Post

cas3 · 12-25-2017, 05:03 PM

core plugs are on the bottom, between oil pan and block. you can see two bumps on the side of the block where they are located. not freeze plugs, but for the factory to remove sand from the casting process

12-25-2017, 05:03 PM	#7
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,577	Re: Removing oil pan in place....RHD core plugs are on the bottom, between oil pan and block. you can see two bumps on the side of the block where they are located. not freeze plugs, but for the factory to remove sand from the casting process