The Ford Barn - View Single Post

nathanmac · 12-25-2017, 06:28 AM

Thanks, that gives me a bit more hope...! any issues with clearances etc? Like you I'm keen to avoid upsetting the sheetmetal but don't want to get it half pulled apart and find there's one little catch that means I have to pull it all out anyway. Looks like I have to drop the front of the sump and move it forward off the dowel(s) at the back so it'll drop down. Don't really have any time off work so I don't want to be mucking around too much!

12-25-2017, 06:28 AM	#3
nathanmac Member Join Date: Feb 2011 Location: Invercargill, New Zealand Posts: 93	Re: Removing oil pan in place....RHD Thanks, that gives me a bit more hope...! any issues with clearances etc? Like you I'm keen to avoid upsetting the sheetmetal but don't want to get it half pulled apart and find there's one little catch that means I have to pull it all out anyway. Looks like I have to drop the front of the sump and move it forward off the dowel(s) at the back so it'll drop down. Don't really have any time off work so I don't want to be mucking around too much!