Re: mill head
My personal experience with C heads and B cams agrees with the Piranios dyno tests. I have used NOS and good used B cams. I feel that the B cam is highly over rated. Without the use of a higher compression head, no increase can be felt with the B cam alone. If a B cam is used in conjunction with a higher comression head, such as the 4.6 C head and B carb and manifold, you will gain a few hundred RPM and a little top speed but it won't be felt in the seat of the pants. The increased compression and improved combustion chamber gives the power that a person can feel. This isn't theory or hear say but hands on experience over a lifetime. Everybody is intitled to their own opinion. This is my personal experience.
|