The Ford Barn - View Single Post - 46-48 steering column factory turn signal assembly

flathead47 · 01-10-2012, 10:17 PM

Is the diameter of the Mercury hub the same as the Ford hub as I would still want to use the Ford steering wheel on the Mercury assembly.
Old Henry , thanks for the Ford mumbers.
Displayman , do you have a picture of the Mercury assembly with the steering wheel off.
37Coupe , do you have a picture of the factory assembly you have used.
Johnny , will the 47 steering wheel bolt up to the later model column and match the hub diameter.

01-10-2012, 10:17 PM	#7
flathead47 Member Join Date: Dec 2010 Location: Toronto , Ontario Posts: 86	Re: 46-48 steering column factory turn signal assembly Is the diameter of the Mercury hub the same as the Ford hub as I would still want to use the Ford steering wheel on the Mercury assembly. Old Henry , thanks for the Ford mumbers. Displayman , do you have a picture of the Mercury assembly with the steering wheel off. 37Coupe , do you have a picture of the factory assembly you have used. Johnny , will the 47 steering wheel bolt up to the later model column and match the hub diameter.