Quote:
Originally Posted by Purdy Swoft
I didn't forget the bulbs or a horn resistor , I just figured that was common sense . No harm meant . I did forget to mention repolarizing the generator . To repolarize the generator it is necessary to touch a long enough wire to reach both posts of the cut out and holding it there for a second or two . Repolarizing the generator can only be done with a cut out in pl;ace . Any attempt to repolorize the generator if a can style voltage regulator is in place of the cut out will damage the voltage regulator .
|
Hi Purdy,
Hope I did not come across poorly with my posts. I noticed this was post # 3 for him, and his post said he was a novice. So I chimed in, seemed he may need all the info/advice he could get.