[bluecollarbill]

There are two dual filament bulbs with wired sockets in the kit - which I assume are for the front marker lights. There are additional pre-cut wires with terminals in the kit that probably run to the front and back of the car, along with clips and brackets apparently to secure the wires in place. I agree I can probably figure it out with an ohm meter and some time under the dash - but since this is a Ford option I would like to install it as the dealer would have if possible. There is another one for sale on ebay and is shows an instruction sheet with it - I am hoping someone out there will have one they can scan and send to me or know where I can find one