The Ford Barn - View Single Post

Vic Piano · 05-06-2012, 11:35 AM

A Big THANKS to Shelly & Mac VanPelt

The other day I got the plug wire that I ordered from the Hot Rod Company, along with the Rajah ends for the plugs, they didn't have the correct end caps for the distributor... So, I went up to the local auto parts store as well as NAPA and they told me that they only sell complete plug wire sets... I called Mac; Shelly told me they had the 7mm ends for the distributor. I need 12 to do the LZ but asked Shelly to send 16 because I know I'll most likely mess up one or two installing them...

Thanks again,

Vic

05-06-2012, 11:35 AM	#152
Vic Piano Senior Member Join Date: May 2010 Location: Odessa, FL Posts: 7,611	Re: What I Did on My Lunch Hour *A Big THANKS to Shelly & Mac VanPelt* The other day I got the plug wire that I ordered from the Hot Rod Company, along with the Rajah ends for the plugs, they didn't have the correct end caps for the distributor... So, I went up to the local auto parts store as well as NAPA and they told me that they only sell complete plug wire sets... I called Mac; Shelly told me they had the 7mm ends for the distributor. I need 12 to do the LZ but asked Shelly to send 16 because I know I'll most likely mess up one or two installing them... Thanks again, Vic __________________ Imagination is more important than knowledge.