Re: 12v conversion 59a starter solenoid 4 pole. 46 Mercury.
Ya, that works better. Connect a jumper to the terminal labeled ground button and short it to ground and see if the starter turns.
What's going on at the starter? If it worked directly with an input before, how is it wired up now?
Reread the OP, and now I'm not sure what is the issue you are having.
The starter will not turn the engine over?
Or the engine turns over but the engine will not fire?
Last edited by JSeery; 09-16-2020 at 08:18 PM.
|