The Ford Barn - View Single Post - Radius Rod to Backing Plate Bolts not tight

OL JENNY · 03-20-2018, 08:15 AM

Thanks for all the help on this post. Since the back two bolts attaching the backing plates were tight on both sides, I elected to do as CarlG had done and placed a washer under the head of the front bolts. By doing this I was able to tighten the front bolts completely.
Thanks again for the help.

03-20-2018, 08:15 AM	#12
OL JENNY Senior Member Join Date: Sep 2012 Location: Muscatine, IA Posts: 223	Re: Radius Rod to Backing Plate Bolts not tight Thanks for all the help on this post. Since the back two bolts attaching the backing plates were tight on both sides, I elected to do as CarlG had done and placed a washer under the head of the front bolts. By doing this I was able to tighten the front bolts completely. Thanks again for the help.